SD-60 Static Dissipating Urethane 

SD-60 is a clear, static dissipative thermoplastic polyurethane alloy. SD-60 provides rapid decay of existing static charges, and will not create static charges. Patented dissipative alloy provides permanent ESD protection.

 Typical static decay rate at 12% R.H.

      +5000V to +50V in 1.3 seconds  (Test # FTMC-101C )

      -5000V to -50V in 1.3 seconds  (Test # FTMC-101C )

      Surface resistivity of 1.4 x 10 11ohms/sq.inch (Test # ASTM D-257 )

      Volume resistivity of 4.0 x 10 ohms-cm (Test # ASTM D-257 )

      USDA/FDA acceptance per regulations: 175.105 * 177.1680 * 177.2600

 Physical Descriptions

      Hardness: 88 Shore A

      Thickness: .060 inch

      Tensile Strength: 4700 psi

      Temp. Range: -40 to 180 degrees F

      100% Modulus: 750 psi

      300% Modulus: 1800 psi

      Ultimate Elongation: 760 %

      Tear Strength: 410 lbs./inch

  SUPERIOR BELTING COMPANY

6 Andrews Street  Greenville, SC 29601

 Sales Office  (864) 605-0076    Fax (864) 269-9754    9/00